Roofing Beltsville 2017 Costs

  • Min Cost $5,025.00
  • Avg Cost $5,725.00
  • Max Cost $6,426.00

Find out what it costs

Roofing Beltsville Costs

Whether you are looking for a new roof for your house or if you are building from scratch, there are endless options that you can consider. Nowadays, there are different roofing materials available in the market. You might be looking at composite shingles, wooden roofing, asphalt, concrete, or even slate. All these are options that you can choose from depending on the style you want to achieve. Style is one of the most important factors that will usually determine the type of roof you want, and how much you will spend on it. It also guides your contractors on how to proceed with the installation of your roofing in Beltsville.

One of the considerations you have to look at when hiring Beltsville roofing contractors is the cost. Of course, the price will be the starting point for most homeowners, especially first-time homeowners. However, there are other factors that affect this too. The condition of the existing roofing is another issue that will affect the cost of roofing, especially if you are remodeling the house. In case you have to strip off the old materials and repair the supporting structure, you will have to spend a lot on roofing.

A gable roof with no breaks or few breaks where applicable in the planes is a very simple Beltsville roofing job. However, if there are multiple intersections like skylights, turrets, intersecting rooflines, chimneys, and any other structure on the roof, you will end up spending more on roofing. The type of materials you are using will also affect the cost of roofing. Asphalt shingles, for example, are available from $50 a square, metal roofs at $250 a square, and slate at around $800 a square.

For reference it may be helpful to compare the costs from surrounding towns as well:

FAQ for Roofing in Beltsville

How does “the square” affect my Beltsville roofing decisions?

All the roofers you come across in the market will describe the measurements based on certain specifics. Unlike other contractors, Beltsville roofing experts barely use the term “square feet”. Instead, in its place, they use “square”. This is the basic unit of measurement that roofers use. A square implies 100 square feet, or an area of 10 x 10 feet. For a typical roof of a two-story house on 2,000 square feet complete with a gable roofing, the roofing will cover slightly less than 1,500 square feet of the roofing area, or simply around 15 squares.

How does the material affect the work my Beltsville roofing contractors will do?

According to most expert Beltsville roofing contractors, not all roofing materials that you come across will be perfect for your roof. A lowly sloping and flat surface roof will demand a different roofing material than a roof that features a steeper slope. Take materials like slate or tiles, for example. These are very heavy, so if you consider the structure of most houses and the way their roofing is designed, it is impossible to have them installed, especially for safety reasons. In case you are remodeling, the current roofing material and style will often influence your decision on the new roofing material. Other than the price, therefore, you must look at things like the texture, color, weight, and durability of the roof.

What else do I need for Beltsville roofing replacements?

Whatever choice you have settled on for your Beltsville roofing replacements, flashing is mandatory. This is actually an important part of the exterior work when it comes to roofing, not just for the roof, but also for the siding. This is a plastic or metal film that is applied in strips to parts of the roof where dissimilar materials are joined. This is usually done to make the roofing surface watertight because these are the most common places where leakages will occur.